It is very important to be as precise as possible when specifying tank fittings and accessories. Location, type and size of fittings must be noted clearly on your drawing. If more than one fitting is being specified, mark each fitting with a letter A, B, C, etc. Dimensional drawings are available for all tanks. Blank generic drawings will be supplied for each type of tank listed below.

Indicate width, length and height of tank using inches.

Plan View - Indicate in inches the distance from edge of tank.	Elevation View - Indicate in inches the height from the center of the fitting to the floor.

Example: 24" x 36" x 36" HT. Fitting is 18" in from side along the 36" wall, 18" up from floor.

NOTE: NEVER INCLUDE TANK FLANGE IN YOUR MEASUREMENTS.